国产成人免费a在线播放-国产成人免费a在线视频-国产成人免费a在线资源-国产成人免费v片在线观看-国产成人免费不卡在线观看-国产成人免费福利午夜

Welcome to Suzhou Xinrongfa Metal Products Co., Ltd.
CN EN

Adhering to quality is the life of an enterprise

Coating spraying of Teflon, tungsten carbide and alumina

Service hotline:

15995489385

+ Wechat number:wechat number

Your location: Home > Information dynamics > Industry dynamics

Recommended products

National Service Hotline

15995489385

What are the precautions for valve plate spraying

Source:m.zhanfen.cn      Release date: 2024年11月18日
Information summary:Valve plate spraying is a job that requires correct operation. Here are some precautions: 1、 In terms of preliminary preparation 1. Surface treatment Cleaning: The surface of the valve plate must be cleaned to remove impurities such as oil stains, rust, and old paint layers. Specialized cleaning agents, such as metal oil stain cleaners, can be used to clean by soaking, wiping, or rinsing.
Valve plate spraying is a job that requires correct operation. Here are some precautions:
1、 In terms of preliminary preparation
1. Surface treatment
     Cleaning: The surface of the valve plate must be cleaned to remove impurities such as oil stains, rust, and old paint layers. Specialized cleaning agents, such as metal oil stain cleaners, can be used to clean by soaking, wiping, or rinsing. For stubborn oil stains, multiple cleaning may be necessary to ensure a clean surface. Rust can be polished with sandpaper or treated with rust remover. For example, if there is grease on the surface of the valve plate, it will affect the adhesion of the coating and cause it to peel off during use.
     Roughness adjustment: Increasing the surface roughness of the valve plate appropriately can help improve the adhesion of the coating. It can be achieved through processes such as sandblasting and shot blasting. However, the roughness should be controlled within a reasonable range. Generally speaking, a surface roughness (Ra) between 3.2-12.5 μ m is more suitable. If the roughness is relatively large, it may lead to uneven coating thickness and defects such as pinholes; If the roughness is too small, the coating adhesion is insufficient.
2. Material selection
     Coating type: Choose the appropriate coating according to the usage environment and requirements of the valve plate. If the valve plate is used in high-temperature environments, such as in high-temperature pipeline systems in refineries, it is necessary to choose high-temperature resistant coatings, such as silicone high-temperature resistant paint; If used in corrosive environments such as acidic and alkaline environments in chemical production, anti-corrosion coatings such as epoxy anti-corrosion paint should be used. The performance and construction requirements of different coatings vary greatly, and it is necessary to ensure that the performance of the coatings can meet the working conditions of the valve plate.
    Supporting system: Some coatings require the use of primer, intermediate coat, and topcoat. For example, valve plates used in marine environments may need to be coated with epoxy zinc rich primer first, which can provide good rust prevention and adhesion, followed by intermediate paint to enhance anti-corrosion performance, and then topcoat to improve weather resistance and aesthetics. To ensure compatibility between coatings and avoid chemical reactions that may cause coating failure.
3. Environmental control
    Temperature and humidity: The temperature and humidity of the spraying environment have a significant impact on the quality of the coating. Generally speaking, the construction temperature of most coatings is between 5-35 ℃. If the temperature is too low, the drying speed of the coating will slow down, and it may even fail to dry; If the temperature is too high, the solvent in the coating evaporates too quickly, which can easily lead to defects such as orange peel and pinholes. The humidity is usually required to be below 85%. High humidity environments may cause the coating to turn white and bubble, as moisture may mix into the coating.
    Ventilation conditions: Good ventilation is necessary because coatings contain volatile organic compounds (VOCs). Ventilation can cause solvents to evaporate and reduce the concentration of solvents in the air, which is beneficial for the health of construction workers and also helps with the drying of coatings. Ventilation equipment such as exhaust fans, ventilation ducts, etc. can be used to ensure sufficient fresh air circulation in the spraying area.
2、 In terms of spraying process
1. Spraying equipment
     Spray gun selection and debugging: Choose the appropriate spray gun based on the type and viscosity of the coating. For example, for water-based coatings with low viscosity, smaller caliber spray guns can be used; For paints with high viscosity, larger caliber spray guns are required. Before spraying, adjust the spray shape, spray width and paint spraying amount of the spray gun. The shape of spray can be round or oval, which can be realized by adjusting the nozzle of the spray gun; The spray width can be adjusted according to the size of the valve plate and the area to be sprayed; The amount of paint sprayed should be determined based on the viscosity and spraying speed of the paint to ensure uniform coating thickness.
     Equipment maintenance: Regularly clean and maintain the spraying equipment. After each use, the spray gun should be cleaned to prevent the paint from drying up and blocking the nozzle. For the feeding system, such as paint tanks and pipelines, regular inspections and cleaning should also be carried out to ensure smooth supply of paint. If the equipment malfunctions, such as unstable air pressure in the spray gun, it can lead to uneven coating thickness and decreased quality.
2. Spraying operation
      Spray distance and angle: The distance between the spray gun and the valve plate surface is generally maintained between 15-30cm. If the distance is too close, the paint is prone to accumulate and produce sagging phenomenon; If the distance is too far, the atomization effect of the coating will be poor, which will result in uneven and granular coating. The spraying angle should be as perpendicular as possible to the surface of the valve plate, so as to ensure that the coating is evenly covered on the valve plate. If the angle is tilted, it may result in inconsistent coating thickness and sudden thickness changes at the edges.
      Spray sequence and overlap rate: Spray is usually carried out in a certain order, such as starting from one end of the valve plate, moving the spray gun at a uniform speed, and spraying line by line. The overlap rate between adjacent rows is generally controlled at around 50% -60% to ensure the integrity and uniformity of the coating. If the overlap rate is too low, there may be areas of missed spraying; If the overlap rate is too high, it will cause the coating to be too thick and prone to problems such as sagging.
      Coating thickness control: The thickness of the coating should be strictly controlled to avoid being too thick or too thin. Thick coatings are prone to defects such as sagging and cracking, while thin coatings may not achieve the expected protective or decorative effect. A wet film thickness gauge can be used to detect during the spraying process, adjusting the number of spraying passes and the thickness of each pass based on the solid content of the coating and the required dry film thickness. For example, if the solid content of a certain coating is 50% and the dry film thickness is required to be 100 μ m, then the wet film thickness needs to reach about 200 μ m (considering solvent evaporation), which can be achieved through multiple spraying to meet this thickness requirement.
3、 In terms of post-processing
1. Drying and curing
    Drying time and temperature control: Different coatings have different drying and curing requirements. Some coatings can be naturally dried at room temperature, while others require baking at a certain temperature to fully cure. For example, powder coatings typically require baking at a temperature of 180-200 ℃ for 10-20 minutes. Strictly control the drying and curing time and temperature according to the instructions of the coating to ensure that the coating is fully dried and cured. If the drying and curing are not complete, the hardness, adhesion and other properties of the coating will be affected, and it is easy to be damaged during use.
    Prevent dust pollution: During the drying and curing process of the coating, it is necessary to prevent dust and other impurities from falling on the coating. Dust prevention facilities can be installed in the dry area, such as covering with plastic film or drying in a closed paint booth. If dust falls on the coating, it will affect the appearance and quality of the coating, and it needs to be polished and repaired.
2. Quality inspection
    Appearance inspection: Check whether the appearance of the coating is flat and smooth, and whether there are defects such as sagging, orange peel, pinholes, bubbles, etc. It can be inspected by naked eye observation or using a low-power magnifying glass. For valve plates with high decorative requirements, appearance quality is more important; For functional coatings, appearance defects may also affect the protective performance of the coating.
    Adhesion inspection: Check the adhesion of the coating through methods such as scratch test and tape peeling test. The grid test is to draw a certain size of grid on the coating, then stick it with tape and tear it off to observe the peeling of the coating inside the grid; The tape peeling test involves directly sticking the tape onto the coating, then tearing it off to check if the coating has been adhered by the tape. Good adhesion is the key to the effectiveness of the coating. If the adhesion is insufficient, the coating is prone to detachment during use and lose its protective function.
    Thickness inspection: Use a dry film thickness gauge to check if the thickness of the coating meets the requirements. Multiple measurements should be taken at different positions on the valve plate during measurement to ensure uniform coating thickness. If the thickness does not meet the requirements, the reasons should be analyzed, such as improper spraying operations or problems with the solid content of the coating itself, and corresponding measures should be taken to correct them.
主站蜘蛛池模板: 国产综合精品一区二区三区 | 老熟女富婆激情刺激对白 | 亚洲精品中文字幕制服丝袜 | 欧美黑人添添高潮A片视频 欧美黑人性暴力猛交喷水 欧美黑人性暴力猛交喷水黑人巨大 | 亚洲一区二区黄色 | 亚洲毛片无码不卡av在线播放 | 2025最新四虎免费 | 亚洲一区二区三区av在线观看 | 无码电影在线免费观看 | 三级日本高清完整版热播 | 日韩人妻无码潮喷视频 | 精品无码午夜一区二区三区在线 | 人妻字幕无码系列 | 中文一国产一无码一日韩 | 久久久久久曰本av免费免费 | 婷婷中文字幕一区二区三区 | 免费无码国模国产在线观看 | 无码av电影在线观看不卡 | 国产日产欧产精品精品蜜芽 | 国产在线视频在线观看 | 国产女高清在线看免费观看 | 好看的a v片名字 | 久久久久99精品国产片 | 91精品人成在线观看 | 麻豆精品久久精品色综合 | 欧美巨乳亚洲第一社区 | 国产日韩欧美一区二区视频在线观看 | 中文字幕日韩精品一区口 | 国产裸体美女永久免费无遮挡 | 国产片欧美片亚洲片久久综合 | 三级精品亚洲中文 | 日韩一本之道一区中文字幕 | 亚洲成色www久久网站 | 天美传媒新剧国产资源 | 亚洲东京热国产精品无码视频 | 日韩综合无码一区二区 | 国内揄拍国产精品人妻电影 | 亚洲精品成人网站在线观看 | 国产成人精品久久一区二区三区 | 精品国产福利一区二区在线 | 91无码精品一区 |